Amplificador TV Solid State  VHF Banda III 

BIC/1000VIII
These broadband TV amplifier with 1000W rated output power are designed to amplify the amplitude modulation signal in the VHF bands III. They are produced completely with solid state technology.
Their basic characteristics are:
- broadband amplifier;
- totally modular amplifier;
- forced air cooling system;
- advanced protection system controlled by microprocessor;
- alphanumeric display to check all parameters;
- terminal strip for telemetry and remote control;
- made up by two 500W separate amplifier;
- coupling system realized with hybrid coupler technology;
- on failure of one of the 500W modules, a manual RF by-pass system allows to transmit with 500W output power.

SPECIFICATIONS
Frequency range: 170-230 MHz
Power RF: 1000W (+/- 0.5dB)
Gain: 23 dB
Class: AB
Input/Output impedance: 50 Ohm
I.M.D. (3 tone: -8,-10,-16dB): < -52dB
Spurious level: < -60dB
RF Input connector: N female
RF Output connector: EIA 7/8"
Main supply: 220 VAC +/-10% 50Hz - 60Hz
Power consumption: 3000VA
Operating temperature: -5 - +45°C
Maximum relative humidity: 90%

 

 


Transmisores FM / TV Enlaces Microondas TV Audio Mixers Procesadores Antenas FM / TV Televisión MMDS
Emisoras  Comunitarias Laboratorio EMC Proyectos LLave Mano Estudios Técnicos Nuevos Productos
Servicio de Post Venta Cotizaciones Información Indice Noticias

FM ELECTRONICA Vía La Pica Sector Campo AlegreTelf. +58-291-642-21-28 Fax 58-291-643-42-42    

 Movíl 0416-498-60-23 Maturín, EDO. Monagas Venezuela.

©2002 FM ELECTRONICA - Diseño: Fernando Moreno A.