Amplificador TV Solid State Banda IV/V UHF
BIC/30U
These Broadband TV Amplifiers with 30W rated output power of are designed to amplify the
Amplitude Modulation signal, in the UHF band.
They are manufactured completely with Solid State technology and modular design in one
cabinet for mounting in 19" rack with 3 units height, accessible inside by removing
the upper and lower panels.
Thanks to their features, the preferable use of these amplifiers is as drivers for the
cavity amplifier or RF Amplifier in small and medium size installations.
Note that the I.M.D. issubstantially reduced when the Transmitter or the Transposer uses
the Linearity Precorrector.
A Notch filter is available in output to attenuate the intermodulation products level in
the external range.
| SPECIFICATIONS | |
| R.F. Signal | |
| Frequency range: | bands IV- V |
| Rated output power: | 30 W +/- 0.5 dB synch. peak |
| Gain: | 9 dB |
| I.M.D. (3 tones:-8,-10,-16dB): | -54 dB |
| Spurious and harmonic level: | -60 dB |
| Class: | A |
| Input RF connector: | N female |
| Output RF connector: | N female |
| General data | |
| Power consumption: | 200 VA |
| Power supply: | 220 Vac +/- 10% 50 / 60 Hz |
| Cabinet: | 19" - 3U rackmount |
| Rated temperature: | -5 / 45 °C |
| Maximum relative humidity: | 90% |
| Auxiliary socket for external equipment: | 110/220 Vac - 2 A |
| Cooling: | Forced air |
| Transmisores FM / TV | Enlaces Microondas TV | Audio Mixers Procesadores | Antenas FM / TV | Televisión MMDS |
| Emisoras Comunitarias | Laboratorio EMC | Proyectos LLave Mano | Estudios Técnicos | Nuevos Productos |
| Servicio de Post Venta | Cotizaciones | Información | Indice | Noticias |
|
FM ELECTRONICA Vía La Pica Sector Campo AlegreTelf. +58-291-642-21-28 Fax 58-291-643-42-42 |
|
Movíl 0416-498-60-23 Maturín, EDO. Monagas Venezuela. |
|
©2002 FM ELECTRONICA - Diseño: Fernando Moreno A. |