Amplificador TV SolidState Banda IV/V UHF
BIC/100U
These Broadband TV Amplifiers with 100W rated output power are designed to amplify the
Amplitude Modulation
signal, in the UHF
band.
They are manufactured completely with Solid State technology and modular design in one
cabinet for mounting in 19" rack with 5 units
height, accessible insideby removing
the upper and lower
panels.
Thanks to their
features, the preferable use of these amplifiers is as drivers for the
cavity amplifier or RF Amplifier in small and medium size
installations.
Note that the
I.M.D. is substantially reduced when the Transmitter or the Transposer uses
the Linearity
Precorrector.
A Notch filter is available in output to attenuate the intermodulation products level in
the external
range.
| SPECIFICATIONS | |
| R.F. Signal | |
| Frequency range: | bands IV- V |
| Rated output power: | 100 W +/- 0.5 dB synch. peak |
| Gain: | 16 dB |
| I.M.D. (3 tones:-8,-10,-16dB): | -54 dB |
| Spurious and harmonic level: | -60 dB |
| Class: | AB |
| Input RF connector: | N female |
| Output RF connector: | N female |
| General data | |
| Power consumption: | 450 VA |
| Power supply: | 220 Vac +/- 10% 50 / 60 Hz |
| Cabinet: | 19" - 5U rackmount |
| Rated temperature: | -5 / 45 °C |
| Maximum relative humidity: | 90% |
| Auxiliary socket for external equipment: | 110/220 Vac - 2 A |
| Cooling: | Forced air |
| Transmisores FM / TV | Enlaces Microondas TV | Audio Mixers Procesadores | Antenas FM / TV | Televisión MMDS |
| Emisoras Comunitarias | Laboratorio EMC | Proyectos LLave Mano | Estudios Técnicos | Nuevos Productos |
| Servicio de Post Venta | Cotizaciones | Información | Indice | Noticias |
|
FM ELECTRONICA Vía La Pica Sector Campo AlegreTelf. +58-291-642-21-28 Fax 58-291-643-42-42 |
|
Movíl 0416-498-60-23 Maturín, EDO. Monagas Venezuela. |
|
©2002 FM ELECTRONICA - Diseño: Fernando Moreno A. |