Amplificador  TV Solid State Banda IV/V UHF

BIC/1000U
These broadband TV amplifier with 1000W rated output power are designed to amplify the amplitude modulation signal in the UHF band. They are manufactured completely with solid state technology.
Their basic characteristics are:
- broadband amplifier;
- totally modular amplifier;
- forced air cooling system;
- advanced protection system controlled by microprocessor;
- alphanumeric display to check all parameters;
- terminal strip for telemetry and remote control;
- made up by two separate 500W amplifier;
- coupling system realized with hybrid coupler technology;
- on failure of one 500W module, a manual RF by-pass system allows to transmit with 500W output power.

SPECIFICATIONS
Frequency range: 470-870 MHz
Power RF: 1000W (+/- 0.5dB)
Gain: 27 dB
Class: AB
Input/Output impedance: 50 Ohm
I.M.D. (3 tone: -8,-10,-16dB): < -54dB
Spurious level: < -60dB
RF Input connector: N female
RF Output connector: EIA 7/8"
Main supply: 220 VAC +/-10% 50Hz - 60Hz
Power consumption: 2000VA with color bar signal
Operating temperature: -5 - +45°C
Maximum relative humidity: 90%
Cabinet: Rack 19" 36 U
Dimensions(WxDxH): 567x680x178

Transmisores FM / TV Enlaces Microondas TV Audio Mixers Procesadores Antenas FM / TV Televisión MMDS
Emisoras  Comunitarias Laboratorio EMC Proyectos LLave Mano Estudios Técnicos Nuevos Productos
Servicio de Post Venta Cotizaciones Información Indice Noticias

FM ELECTRONICA Vía La Pica Sector Campo AlegreTelf. +58-291-642-21-28 Fax 58-291-643-42-42    

 Movíl 0417-913-23-77 Maturín, EDO. Monagas Venezuela.

©2002 FM ELECTRONICA - Diseño: Fernando Moreno A.