p10

This broadband amplifiers has been developed with MOSFET technology for FM sound broadcasting in the band II/VHF from 88 to 108 MHz.
It uses electronic proteccions to control all the parameters of the amplifier, that is the voltage and current of any single MOSFET, the output power, the reflected power, the unbalancing between the MOSFETs and the temperature.
The fornt panel, besides displaying all these measures on an meter, checks their values and intervenes in case of anomalies showing this on the leds display.
This amplifier uses high-performance switching power supplies with a working range from 170 to 240V and a cos of 0.95, thus meaning an high performance and a low energy consumption.
The output power is 500 W. Besides it has a connector for remote control, all this in a very compact cabinet: 19".

SPECIFICATIONS

RF section
Frequency range:	88 to 108 MHz
Modulation:	FM
Rated output power:	500 W +/- 0.25dB
Class:	C
Output connector:	N female connector
Input/Output impedance:	50 ohm
Gain:	19 dB (min.)
Input power:	7 W max.
Harmonic attenuation:	< -70 dBc

General data
Power supply:	220 Vac +10% -25% - 50 Hz - 60Hz
Power consumption:	850 VA
Cabinet:	19"-5U
Weight:	28 Kg
Dimensions (WxDxH):	510x485x420 mm
Rated temperature:	-5 to +45 C°
Maximum relative humidity:	90%

Transmisores FM / TV	Enlaces Microondas TV	Audio Mixers Procesadores	Antenas FM / TV	Televisión MMDS
Emisoras Comunitarias	Laboratorio EMC	Proyectos LLave Mano	Estudios Técnicos	Nuevos Productos
Servicio de Post Venta	Cotizaciones	Información	Indice	Noticias